UPS Sentinel Dual SDU 4-10kVA
Karta katalogowa
SENTINEL Dual SDU 1-phase is a new generation UPS, available in Tower or Rack versions. This UPS has a rotatable panel which can be adjusted depending on version of the UPS (Tower or Rack). Sentinel Dual is a UPS that is more modern, more reliable and has greater efficiency. All Sentinel Dual SDU UPS operate in true on-line mode and are made with ON LINE double conversion technology (VFI).
12 398 74 01Main features
- Power factor 1, kW = kVA (from SDU 5000 model)
- Parallel operation of up to 3 units
- Simplified installation
- Selectable operating modes
- High output voltage quality: high inverter over-current capability (up to 150%), power factor correction, filtered, reliable voltage - VFI double conversion technology compliant with EN62040-3
- High battery reliability
Characteristics
Available operating modes of Sentinel Dual UPS
- ON LINE mode - UPS efficiency of over 95%.
- ECO MODE can increase efficiency to over 98%, and allows selection of LINE INTERACTIVE (VI) mode for less critical loads
- SMART ACTIVE - in this mode the UPS automatically selects VFI or VI mode based on the mains power quality
- STANDBY OF mode - this mode allows the UPS to be programmed to operate only in the event of an emergency power failure.
Mode selection on the Sentinel Dual UPS can be done remotely - via the software or from the display.
Sentinel Dual - application
Sentinel Dual SDU UPS is the best solution for powering mission-critical applications and electro-medical equipment requiring maximum power reliability.
This power supply offers the possibility to reduce energy consumption by using ECO and SMART ACTIVE modes. It also has EnergyShare sockets for setting priority loads.
Specification
UPS SDU 4000
UPS SDU 5000
UPS SDU 6000
UPS SDU 8000
UPS SDU 10000
UPS model i moc
Model:
UPS SDU 4000
Active power [W]:
4000
Nominal power [VA]:
4000
Input
Dual input:
no
Voltage:
220/230/240 V
Voltage tolerance:
230 V +/-20%
Minimum voltage:
184 V
Frequency [Hz]:
50/60 +/-5
Power factor:
>0,98
Voltage distortion:
≤ 5%
By-pass
Phase voltage tolerance:
180/264 V (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance:
+/-5% (selectable)
Output
Voltage:
208/220/230/240 V (selectable)
Total harmonic distortion THDv:
<1% linear load; <3% non-linear load
Static variation:
1.5%
Crest factor:
3:1
Dynamic variation:
≤5% in 20 ms.
Waveform:
Sinusoidal
Frequency [Hz]:
50/60 selectable
Transfer time [ms]:
0
Others
Efficiency:
up to 95% in On Line mode, up to 98% ECO mode
Batteries:
VRLA AGM maintenance-free lead based, typical recharge time 4-6H
Communications:
USB / RS232 and contacts / slot for communication interface / REPO + Input contact
Protections:
Overcurrent - short circuit - overvoltage - undervoltage - temperature - excessive low battery
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
0ºC-40ºC
Relative humidity:
5-95% non-condensing
Colour:
Black, RAL 9005
Dimensions (WxDxH) [mm]:
131x640x448 Tower, 19"x640x3U Rack
Net weight [Kg]:
38
Gross weight [Kg]:
43
UPS model i moc
Model:
UPS SDU 5000/ 5000 PDIST
Active power [W]:
5000
Nominal power [VA]:
5000
Input
Dual input:
no
Voltage:
220/230/240 V
Voltage tolerance:
230 V +/-20%
Minimum voltage:
184 V
Frequency [Hz]:
50/60 +/-5
Power factor:
>0,98
Voltage distortion:
≤ 5%
By-pass
Phase voltage tolerance:
180/264 V (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance:
+/-5% (selectable)
Output
Voltage:
208/220/230/240 V (selectable)
Total harmonic distortion THDv:
<1% linear load: <3% non-linear load
Static variation:
1.5%
Crest factor:
3:1
Dynamic variation:
≤5% in 20 ms.
Waveform:
Sinusoidal
Frequency [Hz]:
50/60 selectable
Transfer time [ms]:
0
Others
Efficiency:
up to 95% in On Line mode, up to 98% ECO mode
Batteries:
VRLA AGM maintenance-free lead based, typical recharge time 4-6H
Communications:
USB / RS232 and contacts / slot for communication interface / REPO + Input contact
Protections:
Overcurrent - short circuit - overvoltage - undervoltage - temperature - excessive low battery
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
0ºC-40ºC
Relative humidity:
5-95% non-condensing
Colour:
Black, RAL 9005
Dimensions (WxDxH) [mm]:
131x640x448 Tower, 19"x640x3U Rack
Net weight [Kg]:
45
Gross weight [Kg]:
53
UPS model i moc
Model:
UPS SDU 6000/ 6000 PDIST/ 6000 ER
Active power [W]:
6000
Nominal power [VA]:
6000
Input
Dual input:
no
Voltage:
220/230/240 V
Voltage tolerance:
230 V +/-20%
Minimum voltage:
184 V
Frequency [Hz]:
50/60 +/-5
Power factor:
>0,98
Voltage distortion:
≤ 5%
By-pass
Phase voltage tolerance:
180/264 V (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance:
+/-5% (selectable)
Output
Voltage:
208/220/230/240 V (selectable)
Total harmonic distortion THDv:
<1% linear load; <3% non-linear load
Static variation:
1.5%
Crest factor:
3:1
Dynamic variation:
≤5% in 20 ms.
Waveform:
Sinusoidal
Frequency [Hz]:
50/60 selectable
Transfer time [ms]:
0
Others
Efficiency:
up to 95% in On Line mode, up to 98% ECO mode
Batteries:
VRLA AGM maintenance-free lead based, typical recharge time 4-6H
Communications:
USB / RS232 and contacts / slot for communication interface / REPO + Input contact
Protections:
Overcurrent - short circuit - overvoltage - undervoltage - temperature - excessive low battery
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
0ºC-40ºC
Relative humidity:
5-95% non-condensing
Colour:
Black, RAL 9005
Dimensions (WxDxH) [mm]:
131x640x448 Tower, 19"x640x3U Rack
Net weight [Kg]:
46
Gross weight [Kg]:
54
UPS model i moc
Model:
UPS SDU 8000/ 8000 TM
Active power [W]:
8000
Nominal power [VA]:
8000
Input
Dual input:
no
Voltage:
220/230/240 V + 380/400/415 for SDU 8000 TM
Voltage tolerance:
230 V +/-20% and 400 V +/-20% for SDU 8000 TM
Minimum voltage:
184 V + 318 V/ 184 V for SDU 8000 TM
Frequency [Hz]:
50/60 +/-5
Power factor:
>0,98
Voltage distortion:
≤ 5%
By-pass
Phase voltage tolerance:
180/264 V (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance:
+/-5% (selectable)
Output
Voltage:
208/220/230/240 V (selectable)
Total harmonic distortion THDv:
<1% linear load; <3% non-linear load
Static variation:
1.5%
Crest factor:
3:1
Dynamic variation:
≤5% in 20 ms.
Waveform:
Sinusoidal
Frequency [Hz]:
50/60 selectable
Transfer time [ms]:
0
Others
Efficiency:
up to 95% in On Line mode, up to 98% ECO mode
Batteries:
VRLA AGM maintenance-free lead based, typical recharge time 4-6H
Communications:
USB / RS232 and contacts / slot for communication interface / REPO + Input contact
Protections:
Overcurrent - short circuit - overvoltage - undervoltage - temperature - excessive low battery
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
0ºC-40ºC
Relative humidity:
5-95% non-condensing
Colour:
Black, RAL 9005
Dimensions (WxDxH) [mm]:
2x(131x640x4480 Tower; 2x(19"x640x3U) Rack
Net weight [Kg]:
19+53
Gross weight [Kg]:
83
UPS model i moc
Model:
UPS SDU 10000/ 10000 DI/ 10000 DI ER/ 10000 TM
Active power [W]:
10000
Nominal power [VA]:
10000
Input
Dual input:
no; yes for SDU 10000 DI and DI ER
Voltage:
220/230/240 V + 380/400/415 for SDU 10000 TM
Voltage tolerance:
230 V +/-20% and 400 V +/-20% for SDU 10000 TM
Minimum voltage:
184 V + 318 V/ 184 V for SDU 10000 TM
Frequency [Hz]:
50/60 +/-5
Power factor:
>0,98
Voltage distortion:
≤ 5%
By-pass
Phase voltage tolerance:
180/264 V (selectable in ECO or SMART ACTIVE mode)
Frequency tolerance:
+/-5% (selectable)
Output
Voltage:
208/220/230/240 V (selectable)
Total harmonic distortion THDv:
<1% linear load; <3% non-linear load
Static variation:
1.5%
Crest factor:
3:1
Dynamic variation:
≤5% in 20 ms.
Waveform:
Sinusoidal
Frequency [Hz]:
50/60 selectable
Transfer time [ms]:
0
Others
Efficiency:
up to 95% in On Line mode, up to 98% ECO mode
Batteries:
VRLA AGM maintenance-free lead based, typical recharge time 4-6H
Communications:
USB / RS232 and contacts / slot for communication interface / REPO + Input contact
Protections:
Overcurrent - short circuit - overvoltage - undervoltage - temperature - excessive low battery
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
0ºC-40ºC
Relative humidity:
5-95% non-condensing
Colour:
Black, RAL 9005
Dimensions (WxDxH) [mm]:
2x(131x640x4480 Tower; 2x(19"x640x3U) Rack; ER wersja (131x640x448) Tower - (19"x640x3U) Rack
Net weight [Kg]:
20+62; 21 - SDU 10000 DI ER
Gross weight [Kg]:
93; 25 - SDU 10000 DI ER
Attachments
Cross-selling products
Karta NetMan 204 Plus
Karta NetMan 204 Plus pozwala na zarządzanie UPS-em bezpośrednio połączonym poprzez LAN 10/100 Mb z…
More
Karta MultiCOM 302
MultiCom 302 pozwala na monitorowanie UPS-a za pomocą protokołu Modbus/JBUS poprzez łącze RS232 l…
More
Karta MultiCOM 352
Karta MultiCOM 352 umożliwia przyłączenie dwóch urządzeń do jednego portu szeregowego zasilacza UPS…
More
Karta MultiCOM 372
Karta MultiCOM 372 umożliwia uzupełnienie dodatkowego portu szeregowego RS232 do zasilacza UPS, aby…
More
Karta MultiCOM 384
MultiCOM 384 zawiera zestaw styków przekaźnikowych do informowania o stanie i alarmach zasilacza UP…
More
Karta MultiCOM 411
Karta MultiCOM 411 umożliwia podłączenie zasilacza UPS do sieci Profibus DP (Decentralised Peripher…
More
Karta MultiCOM 421
MultiCOM 421 to karta komunikacyjna, która łączy zasilacz UPS z siecią PROFINET-IO. W środowiskach …
More
