Kogeneracja, zasilacze UPS, falowniki, soft-starty
Polski
Our offer Emergency power supply UPS 1-phase UPS

UPS Omega RT

Karta katalogowa
CES Omega UPS is a modern uninterruptible power supply unit made with true online technology. The CES Omega UPS features pure sine wave voltage and has 1-phase input and output power. The efficiency of this uninterruptible power supply is even above 98%. Depending on the user's needs, it can be installed in a Rack or Tower version.
 Specification  Attachments  Cross-selling products  Contact form

Main features

  • True online UPS, double conversion
  • Tower/Rack version
  • DSP control technology
  • Input power factor 0.99
  • Input power factor correction
  • Output power factor 0.9
  • ECO operation
  • EPO switch
    • Two frequency conversion modes
    • LCD display
    • Communication: RS232 and USB as standard

 

Characteristics

True online technology in the CES Omega RT 1-10 kVA UPS - best power quality

The CES Omega UPS is made with true online technology which means that it is isolated from the mains supply. The voltage the UPS delivers at its output, whether it is 1kVA, 2kVA or 6kVA, is pure sine wave. Thanks to this solution, the power supply provides the highest quality power supply. It can therefore be used for the most sensitive equipment.

Operating modes

  • Online/frequency converter mode
  • Battery mode
  • ECO mode
  • Static bypass/bypass mode
  • Emergency mode

 

Parallel operation mode for 6kVA and 10kVA UPS

The parallel operation port is provided by Omega 6 kVA and 10 kVA UPSs. The UPS operates in an N+X structure, which is the most reliable and increases the safety of the system. For example, two individual UPSs form a parallel arrangement for the load. If one UPS malfunctions, the other can independently take over the entire load. This improves reliability in the event of a malfunctioning UPS and, in accordance with various user requirements
user, each UPS should have a manual service bypass switch.

 

Communication in the Omega RT power supply

Communication ports

Users can monitor the UPS system via a communication port such as a standard RS232 port and a standard USB port using a computer. With a communication cable to connect the UPS and the computer, the UPS can be easily managed.

 EPO port

EPO - Emergency Power Off. The EPO port is located on the rear panel of the UPS. In some emergency cases, users can immediately switch off power to the UPS loads by activating the EPO port.

Expansion cards - optional

The CES OMEGA series of online UPS has an intelligent type expansion slot on the rear panel. The slot is designed for an SNMP card, a dry contact card or an RS485 card. Users can insert the expansion card of their choice from the above to monitor and manage the operation of the UPS. The UPS does not need to be shut down during the installation of the expansion card.

SNMP card

The SNMP card for the UPS is compatible with most available software, hardware and operating systems. It is used for network management so that the UPS can be communicated with over the Internet, read information about the UPS status and input power, etc.  The card can control the UPS via a network management system using the SNMP protocol.

Dry contact card and RS485

These are further cards for intelligent management and monitoring of the Omega RT UPS.

Mounting methods for Omega RT UPS

 

Parallel operation diagram for Omega UPS

Schemat pracy równoległej dla zasilacza UPS CES Omega RT

 

 

 

 

 

Specification

UPS CES Omega RT 1000

UPS CES Omega RT 3000

UPS CES Omega RT 6000

UPS CES Omega RT 10000

UPS model i moc

Model:
UPS Omega RT 1000 kVA
Active power [W]:
900
Nominal power [VA]:
1000

Wejście

Voltage [V]:
208/220/230/240
Input rated voltage [V]:
110/176-300 (for load: 50%/100%)
Frequency [Hz]:
50/60 (auto-sensing)
Frequency tolerance [Hz]:
40-70
Power factor:
≥ 0.99
Bypass voltage range:
-25% - +15% (settable)

Komunikacja

Standard configuration:
RS232/USB/EPO
Optional:
SNMP, Modbus RTU, Modbus TCP/IP, AS 400

System

Efficiency:
≥90% in ECO MODE ≥95%
Display:
LCD+LED
Protections:
Short circut - overtemperature - overvoltage - undervoltage - fans failure

Wyjście

Voltage [V]:
208/220/230/240
Voltage tolerance:
+/- 1%
Frequency [Hz]:
50/60 +/- 0.1
Waveform:
Sinusoidal
Crest factor:
3:1
Total harmonic distortion THDv:
≤ 2% linear load ≤ 5% non-linear load
Transfer time [ms]:
0
Overload:
105% ~ 125% for 1 min, 125% ~ 150% for 30 s, >150% for 300 ms

Others

Relative humidity:
0 ~ 95% non-condensing
Noise level:
≤ 50dB (1m)
Dimensions (WxDxH) [mm]:
440x468x88
Net weight [Kg]:
12
Standards:
LVD 2014/35/EU dyrektywa niskonapięciowa, norma: EN 62040-1:2019; EMC 2014/30/EU dyrektywa o kompatybilności elektromagnetycznej, norma: EN 62040-1, IEC EN 62040-2:2019; Zgodność z RoHS, klasyfikacja zgodnie z IEC 63000:2018; WEEE 2012/19/UE

UPS model i moc

Model:
UPS Omega RT 3000 kVA
Active power [W]:
2700
Nominal power [VA]:
3000

Wejście

Voltage [V]:
208/220/230/240
Input rated voltage [V]:
110/176-300 (dla obciążeń: 50%/100%)
Frequency [Hz]:
50/60 (auto-sensing)
Frequency tolerance [Hz]:
40-70
Power factor:
≥ 0.99
Bypass voltage range:
-25% - +15% (regulowany)

Komunikacja

Standard configuration:
RS232/USB/EPO
Optional:
SNMP, Modbus RTU, Modbus TCP/IP, AS 400

System

Efficiency:
≥92% w trybie ECO ≥97%
Display:
LCD+LED
Protections:
Przeciwzwarciowe - przeciążeniowe – przegrzanie - niskie naładowanie baterii - awaria wentylatorów

Wyjście

Voltage [V]:
208/220/230/240
Voltage tolerance:
+/- 1%
Frequency [Hz]:
50/60 +/- 0.1
Waveform:
czysta sinusoida
Crest factor:
3:1
Total harmonic distortion THDv:
≤ 2% obciążenie liniowe ≤ 5% obciążenie nieliniowe
Transfer time [ms]:
0
Overload:
105% ~ 125% przez 1 min, 125% ~ 150% przez 30 s, >150% do 300 ms

Others

Relative humidity:
0 ~ 95% bez kondensacji
Noise level:
≤ 50dB (1m)
Dimensions (WxDxH) [mm]:
440x658x88
Net weight [Kg]:
29
Standards:
LVD 2014/35/EU dyrektywa niskonapięciowa, norma: EN 62040-1:2019; EMC 2014/30/EU dyrektywa o kompatybilności elektromagnetycznej, norma: EN 62040-1, IEC EN 62040-2:2019; Zgodność z RoHS, klasyfikacja zgodnie z IEC 63000:2018; WEEE 2012/19/UE

UPS model i moc

Model:
UPS Omega RT 6000 kVA
Active power [W]:
6000
Nominal power [VA]:
6000

Wejście

Voltage [V]:
208/220/230/240
Input rated voltage [V]:
110/176-288 (for load: 50%/100%)
Frequency [Hz]:
50/60 (auto-sensing)
Frequency tolerance [Hz]:
40-70
Power factor:
≥ 0.99
Bypass voltage range:
-40% - +15% (settable)

Komunikacja

Standard configuration:
RS232/USB/EPO
Optional:
SNMP, Modbus RTU, Modbus TCP/IP, AS 400

System

Efficiency:
≥94% in ECO mode ≥98%
Display:
LCD+LED
Protections:
Short-circut – overload – overtemperature – excessive low battery – overvoltage – undervoltage – fans failure

Wyjście

Voltage [V]:
208/220/230/240
Voltage tolerance:
+/- 1%
Frequency [Hz]:
50/60 +/- 0.1
Waveform:
Sinusoidal
Crest factor:
3:1
Total harmonic distortion THDv:
≤ 1% linear load ≤ 4% non-linear load
Transfer time [ms]:
0
Overload:
102% ~ 110% for 10 min, 110% ~ 125% for 1 min, 125% ~ 150% for 30 s

Others

Relative humidity:
0 ~ 95% non-condensing
Noise level:
≤ 55dB (1m)
Dimensions (WxDxH) [mm]:
440x660x176
Net weight [Kg]:
58
Standards:
LVD 2014/35/EU dyrektywa niskonapięciowa, norma: EN 62040-1:2019; EMC 2014/30/EU dyrektywa o kompatybilności elektromagnetycznej, norma: EN 62040-1, IEC EN 62040-2:2019; Zgodność z RoHS, klasyfikacja zgodnie z IEC 63000:2018; WEEE 2012/19/UE

UPS model i moc

Model:
UPS Omega RT 10000 kVA
Active power [W]:
10000
Nominal power [VA]:
10000

Wejście

Voltage [V]:
208/220/230/240
Input rated voltage [V]:
110/176-300 (for load: 50%/100%)
Frequency [Hz]:
50/60 (auto-sensing)
Frequency tolerance [Hz]:
40-70
Power factor:
≥ 0.99
Bypass voltage range:
-40% - +15% (settable)

Komunikacja

Standard configuration:
RS232/USB/EPO
Optional:
SNMP, Modbus RTU, Modbus TCP/IP, AS 400

System

Efficiency:
≥94% in ECO mode ≥98%
Display:
LCD+LED
Protections:
Short-circut – overload – overtemperature – excessive low battery – overvoltage – undervoltage – fans failure

Wyjście

Voltage [V]:
208/220/230/240
Voltage tolerance:
+/- 1%
Frequency [Hz]:
50/60 +/- 0.1
Waveform:
Sinusoidal
Crest factor:
3:1
Total harmonic distortion THDv:
≤ 1% linear load ≤ 4% non-linear load
Transfer time [ms]:
0
Overload:
102% ~ 110% for 10 min, 110% ~ 125% for 1 min, 125% ~ 150% for 30 s

Others

Relative humidity:
0 ~ 95% non-condensing
Noise level:
≤ 58dB (1m)
Dimensions (WxDxH) [mm]:
440x660x176
Net weight [Kg]:
63
Standards:
LVD 2014/35/EU dyrektywa niskonapięciowa, norma: EN 62040-1:2019; EMC 2014/30/EU dyrektywa o kompatybilności elektromagnetycznej, norma: EN 62040-1, IEC EN 62040-2:2019; Zgodność z RoHS, klasyfikacja zgodnie z IEC 63000:2018; WEEE 2012/19/UE

Attachments

Karta katalogowa

Cross-selling products

Karta SNMP

Karta SNMP

Karta komunikacyjna SNMP pozwala na czytelne przedstawienie informacji o stanie karty sieciowej ora…
More 
Karta AS 400

Karta AS 400

Karta ta umożliwia odwzorowanie stanu pracy UPS-a przy pomocy styków bezpotencjałowych (przekaźnikó…
More 

Ask about the product

Do you prefer to contact us by phone?

12 398 74 01

Call for more information and price

Our offer

Cogeneration

UPS Power
Supply Units

Electric
Drives

Biogas
Equipment

Insulators
Tags: ups zasilanie-awaryjne
Accessibility settings
Line height
Letter spacing
Link highlight
No animations
Reading line
Speech
No images
Focus on content
Bigger cursor
Hotkeys