UPS Master MPS 10-100kVA
The MPS UPS provides maximum protection and high-quality backup power supply for mission-critical equipment.
The UPS is ideal for IT centres, hospitals, telecommunications and industry. The MPS is an on-line UPS with double conversion (VFI SS 111 - IEC EN 62040-3) and a transformer that provides galvanic isolation for the inverter. Designed with three phases on the input and one on the output 3:1.
12 398 74 01Main features
- Robust and reliable
- Galvanic isolation
- High overload resistance
- Wide range of parallel configurations
- cosφ = 0.9
Characteristics
The Master MPS is designed for the most critical applications, from IT systems to demanding industrial environments, where quality and continuity of power supply are important. It guarantees maximum power and the ability to operate up to 6 units in parallel.
Battery protection system in the Master MPS UPS
The battery protection system of the Master MPS UPS incorporates a number of features designed to optimise battery management and achieve the best performance and extended battery life.
- Dual level charging to optimise current draw and reduce charging time
- Temperature compensation and deep discharge battery protection to improve battery life and reduce battery ageing
- Charge locking system to reduce electrolyte consumption and extend the life of batteries VRLA.
- Test for quick battery diagnostics
Installation of the UPS Master MPS
The UPS Master MPS does not require a large amount of space for installation: only 0.64 m² for 200 kVA of power. The panel for servicing all major components of the UPS is located at the front of the unit. In addition, the fan is located on top of the UPS cover.
Reliability and availability of the Master MPS UPS
- Extensive configuration options of parallel operation .
- Hot System Expansion (HSE) - allows new UPS to be added to an existing system, without having to shut down the UPS in operation. This guarantees maximum protection of the supplied equipment, even during system expansion.
- Maximum availability levels. The system is "fault-tolerant". - in the event of damage to one of the bus cables in parallel operation, the power supply continues with an alarm signal.
- Efficiency Control System (ECS) - a system designed to optimise the operational efficiency of parallel operation.
Specification
UPS Master MPM 10 BAT
UPS Master MPM 15 BAT
UPS Master MPM 20 BAT
UPS Master MPM 30
UPS Master MPM 40
UPS Master MPM 60
UPS Master MPM 100
UPS model i moc
Model:
UPS Master MPM 10 BAT
Active power [W]:
9000
Nominal power [VA]:
10000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% full load
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
60 dBA w trybie ECO
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
555x740x1400
Weight without battery [Kg]:
200
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 15 BAT
Active power [W]:
13500
Nominal power [VA]:
15000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% dla pelnego obciążenia
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
60 dBA in ECO mode
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
555x740x1400
Weight without battery [Kg]:
220
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 20 BAT
Active power [W]:
18000
Nominal power [VA]:
20000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% full load
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
60 dBA in ECO mode
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
555x740x1400
Weight without battery [Kg]:
230
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 30
Active power [W]:
27000
Nominal power [VA]:
30000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% full load
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
62 dBA in ECO mode
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
555x740x1400
Weight without battery [Kg]:
255
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 40
Active power [W]:
36000
Nominal power [VA]:
40000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% full load
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
62 dBA in ECO mode
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
555x740x1400
Weight without battery [Kg]:
302
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 60
Active power [W]:
54000
Nominal power [VA]:
60000
Input
Voltage:
380/400/415 V 3 phases
Voltage tolerance:
400 V +20% -25% full load
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-phase+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% for 60 min.; 125% for 10 min.; 150% for 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
62 dBA w trybie ECO
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
800x740x1400
Weight without battery [Kg]:
416
Parallel operation:
yes
UPS model i moc
Model:
UPS Master MPM 100
Active power [W]:
90000
Nominal power [VA]:
100000
Input
Voltage:
380/400/415 V 3 fazy
Voltage tolerance:
400 V +20% -25% dla pelnego obciążenia
Frequency [Hz]:
45-65
Frequency tolerance:
+/-2% (selectable from front panel from 1% do 5% )
By-pass
Voltage [V]:
220/230/240 1-faza+N
Frequency:
50/60 Hz (selectable)
Output
Voltage:
220/230/240 1 phase+N (selectable)
Voltage static stability:
+/-1%
Dynamic stability:
+/-5% in 10 s
Crest factor:
3:1
Frequency [Hz]:
50/60 selectable
Frequency stability on battery mode:
0.05%
Transfer time [ms]:
0
Overload:
110% przez 60 min.; 125% przez 10 min.; 150% przez 1 min.
Others
Efficiency:
>98% in ECO mode
Batteries:
VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels
Communications:
Double RS232 + dry contacts + 2 slots for communications interface
Standards:
European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility -- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant -- Classification in accordance with IEC 62040-3 VFI - SS - 111
Protection degree:
IP 20
Operating temperature [ºC]:
+20 - +25
Relative humidity:
5-95% non-condensing
Noise level:
62 dBA w trybie ECO
Colour:
Dark grey RAL 7016
Dimensions (WxDxH) [mm]:
800x800x1900
Weight without battery [Kg]:
665
Parallel operation:
yes
Cross-selling products
Karta NetMan 204 Plus
Karta NetMan 204 Plus pozwala na zarządzanie UPS-em bezpośrednio połączonym poprzez LAN 10/100 Mb z…
More
Karta MultiCOM 302
MultiCom 302 pozwala na monitorowanie UPS-a za pomocą protokołu Modbus/JBUS poprzez łącze RS232 l…
More
Karta MultiCOM 352
Karta MultiCOM 352 umożliwia przyłączenie dwóch urządzeń do jednego portu szeregowego zasilacza UPS…
More
Karta MultiCOM 411
Karta MultiCOM 411 umożliwia podłączenie zasilacza UPS do sieci Profibus DP (Decentralised Peripher…
More
Karta MultiCOM 421
MultiCOM 421 to karta komunikacyjna, która łączy zasilacz UPS z siecią PROFINET-IO. W środowiskach …
More
