UPS CES Omega 1kVA -10kVA, 1-phase
Main features
- DSP control technology
- Input power factor 0.99
- Output power factor 0.9, for 6kVA and 10kVA = 1
- ECO energy saving mode
- EPO switch
- LCD display
- Self-test after power-up
- Protection: short-circuit and overload protection
- RS232 and USB communication, optional: RS485/SNMP, AS400, potential-free contacts, MODBUS
Characteristics
A new series of CES Omega UPS is available, where for 6kVA and 10 kVA output power factor is 1, nominal power = active power. In addition, ER models have a more efficient battery charger.
CES Omega tower UPS - rear view with description
1. Input socket
2. External battery socket (optional)
3. Fans/ventilation grille
4. USB port
5. EPO port
6. RS232 port
7. Slot for expansion cards
8. Output sockets
EMI/FRI filters in OMEGA UPS
These UPS components provide surge protection and filter out both electromagnetic interference (EMI) and radio frequency interference (RFI). They minimise any overvoltage or interference occurring in the power cable and provide protection for sensitive equipment.
PFC power factor correction
In normal operation, the rectifier/power factor correction (PFC) circuit converts usable AC power into regulated DC power for use by the inverter, while ensuring that the input current waveform used by the UPS is almost ideal. By extracting this sinusoidal input current, two objectives are achieved:
- The usable power is used by the UPS as efficiently as possible (higher efficiency),
- The amount of distortion reflected on the mains supply is reduced.
This results in cleaner power being available for other equipment in the building that is not protected by the UPS.
Batteries in Omega UPS
Omega UPS operate sealed, maintenance-free lead-acid batteries. To maintain battery life, the UPS and batteries are best used at an ambient temperature of 15 to 25°C.
Static by-pass
The UPS provides an alternative power path to the connected load in the event of a UPS failure. In the event of an overload, over-temperature or other failure, the UPS automatically switches the connected load to by-pass.
UPS Omega UPS 1-10 kVA operating modes
Standard UPS operating modes include normal (on-line) mode, by-pass mode, battery mode, ECO mode, frequency converter mode, self-test mode.
Specification
UPS CES Omega 1000 VA
UPS CES Omega 3000VA
UPS CES Omega 10000VA
UPS model i moc
Input
Batteries
Output
Komunikacja
Others
UPS model i moc
Input
Batteries
Output
Komunikacja
Others
UPS model i moc
Input
Batteries
Output
Komunikacja
Others
Cross-selling products
Karta SNMP
More
Karta AS 400
More